PAGE - 58
Programming Manual
AM_8200
NOTIFIER ITALIA
Doc. M-162.1-AM8200-ENG Rev A2
AM8200_manu-prog-ENG
When a module is
Disabled
the control unit is
inhibited to the reception of the Alarm and
Faults signaling from the module.
To
Disable
a module select it through the
function keys. Once the device has been
selected press the
enter
key
and through
the
arrow
keys
select
YES
and
subsequently press the
enter
key
to
confirm the disablement.
M
M
O
O
D
D
I
I
F
F
Y
Y
By selecting the
“Modify
” item, and
typing the correct password Level 2,
the following display will appear,
where it is possible to change the state of Enabled/Disabled for the various devices
Modify Status - Detectors
The display shows by default the first device of the first line. To select another device use the function keys.
Modify Status - Modules
The display shows by default the first device of the first line. To select another device use the function keys.
When a detector is
Disabled
the control unit
is inhibited to the reception of the Alarm and
Faults signaling from the sensor.
To
Disable
a detector select it through the
function keys. Once the device has been
selected press the
enter
key
and through
the arrow keys
select
YES
and
subsequently press the
enter
key
to
confirm the disablement.
