background image

PRODUCT DATA

63-2740-02

MS4104, MS4109, MS4604, MS4609, MS8104, 

MS8109 Fast-Acting, Two-Position Actuators

FOR FIRE/SMOKE CONTROL APPLICATIONS

APPLICATION

The MS4104, MS4109, MS4604, MS4609, MS8104 and 

MS8109 Fast-Acting, Two-Position Actuators are spring return 

direct coupled actuators (DCA) for Fire and Smoke dampers 

(on/off control). The actuator accepts an on/off signal from a 

single-pole, single-throw (SPST) controller. Reversible 

mounting allows actuator to be used for either clockwise (cw) 

or counterclockwise (ccw) spring rotation.

FEATURES

• 30 lb-in. (3.4 N•m) or 80 lb-in. (5.9 N•m) minimum 

driving torque at 350°F (176°C).

• Reversible mounting facilitates use in either clockwise 

(cw) or counterclockwise (ccw) spring rotation.

• Integral spring return ensures level of return torque.
• Fifteen-second spring return timing.
• No special cycling required during long-term holding. 

(See Operation section.)

• No audible noise during holding.
• Patent pending design eliminates need for limit 

switches to reduce power consumption.

• Models available for 24, 120, and 230 Vac.
• Ninety-five degree angle of rotation.
• Actuator holds rated torque at reduced power level.
• Die-cast aluminum housing.
• Housing design allows flush mounting to damper.
• Designed to operate reliably in smoke control systems 

requiring Underwriter’s Laboratories Inc. UL555S 

ratings up to 350°F.

• Models available with SPST position-indicating 

switches (7°, 85° stroke).

Contents

Application ........................................................................

1

Features ...........................................................................

1

Specifications ...................................................................

2

Ordering Information  ........................................................

2

Installation ........................................................................

4

Operation ..........................................................................

6

Checkout ..........................................................................

6

Содержание MS4104F1010









Отзывы: