Honeywell Miller 6-2000L, Руководство пользователя

Страница: 5 / 16

5
Dimensions
Type 6-2550L
5m Type 6-2000L
10m Type 6-2400L
15m Type 6-2400L
30m
Hieght (without rope) 275 mm 385 mm 500 mm 500 mm
Breadth 160 mm 238 mm 305 mm 305 mm
Depth 84 mm 140 mm 140 mm 140 mm
Dead weight 5,0 kg 11,7 kg 18,7 kg 19,3 kg
5 . Necessary supplementary parts
The compatibility between the load arrester and the connecting eye of the load has to be warranted .
For the connecting with anchorage point you have to use a proper shackle or a proper steel rope-loop with
shackle or snap hook regarding to DIN EN 362:2008-9 .
!Imoprtant notes!
At all types of device additional fall indicators are attached . Examine before each use/installation whether these
were not released yet
Generally applies: after a crash the equipment MUST go for inspection .
6-2550L
6-2000L / 6-2400L
6 . Proper application / Operations
General Information
Check fall arrester for loads for defects before each putting into operations
( e .g . improper winding off or up, slack line) .
Only use necessary supplementary parts aloud by manufacturer or security management .
The user has to get training, of correct anchorage, storage and identify damages in front of the first using and an
annual refresh .
Take care that the rope is tight all the time . Do not give load on the rope when it is completely out of the load
arrester .
Do not expose the load arrester to aggressive substance or aggressive atmosphere . Exclude all possibility of
extreme dust .
fig .1: fallindicator at the device
activated: broken bar
Fig 2: fall indicator original at the device
Visible nut must be green! If the green
nut no more or the red nut is visible, the
equipment was released .
NT90024681 ver A.indd 5 16.02.16 10:41