manualshive.com logo in svg

Honeywell Marathon, Руководство пользователя

Поделиться
Скачать
Honeywell Marathon Скачать руководство пользователя страница 64

6 - 14

To Use Sign On Screen

1.

After completing the other entries in the profile, leave the user name and password blank.

2.

Importing the CA certificate into the Windows certificate store is optional.

3.

For EAP-TLS, import the User Certificate into the Windows certificate store.

4.

Select the CA certificate.  The certificate can be specified by file name (from the Certs path), a certificate selected 
from the Windows certificate store or the full certificate store.

5.

For EAP-TLS, select the User Cert (User Certificate filename).

6.

If using EAP FAST and manual PAC provisioning, input the PAC filename and password.

7.

Click the 

Commit 

button.

8.

When the device attempts to connect to the network, a sign-on screen is displayed.

9.

Enter the Username and Password. Click the 

OK 

button.

10. Verify the device is authenticated by reviewing the Status tab. When the device is property configured, the  indi-

cates the device is Authenticated and the method used.

11. The sign-on screen is displayed after a reboot. 

Note: See 

Configuring the Profile

 (page 6-17)

 for more details.

If a user enters invalid credentials and clicks 

OK

, the device associates but does not authenticate. The user is again 

prompted to enter credentials.

If the user clicks the 

Cancel 

button, the device does not associate. The user is not prompted again for credentials until:

•

the device is rebooted,

•

the radio is disabled then enabled,

•

the 

Reconnect 

button on the  is clicked or

•

the profile is modified and the 

Commit 

button is clicked.

Windows Certificate Store vs. Certs Path

Note: It is important that all dates are correct on the Marathon and host computers when using any type of certificate. 

Certificates are date sensitive and if the date is not correct authentication will fail.

If using the Windows Certificate Store, the Windows Account must have a password. The password cannot be left 
blank. The Laird Configuration Manager uses the Windows user account credentials to access the Certificate Store. 
The Windows user account credentials need not be the same as the credentials entered in the Laird Configuration 
Manager.

!

Содержание Marathon































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды