manualshive.com logo in svg

Honeywell Marathon, Руководство пользователя

Поделиться
Скачать
Honeywell Marathon Скачать руководство пользователя страница 2

Disclaimer

Honeywell International Inc. (“HII”) reserves the right to make changes in specifications and other information contained in this 
document without prior notice, and the reader should in all cases consult HII to determine whether any such changes have been 
made. The information in this publication does not represent a commitment on the part of HII.

HII shall not be liable for technical or editorial errors or omissions contained herein; nor for incidental or consequential damages 
resulting from the furnishing, performance, or use of this material.

HII disclaims all responsibility for the selection and use of software and/or hardware to achieve intended results.

This document contains proprietary information that is protected by copyright. All rights are reserved. No part of this document 
may be photocopied, reproduced, or translated into another language without the prior written consent of HII.

© 2011-2015 Honeywell International Inc. All rights reserved.

Web Address: 

www.honeywellaidc.com

Trademarks

RFTerm is a trademark or registered trademark of EMS Technologies, Inc. in the United States and/or other countries.

Microsoft

®

, Windows

®

, Windows XP

®

, ActiveSync

®

, MSN, Outlook

®

, Windows Mobile

®

, the Windows logo, and Windows Media 

are registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries.

Intel

®

 and Atom™ are trademarks or registered trademarks of Intel Corporation or its subsidiaries in the United States and other 

countries.

Laird Technologies, the Laird logo, Summit Data Communications, the Summit logo, and “Connected. No Matter What” are 
trademarks of Laird Technologies, Inc.

microSD and microSDHC are trademarks or registered trademarks of SD-3C, LLC in the United States and/or other countries.

The Bluetooth

®

 word mark and logos are owned by the Bluetooth SIG, Inc.

Symbol

®

 is a registered trademark of Symbol Technologies. MOTOROLA, MOTO, MOTOROLA SOLUTIONS and the Stylized M 

Logo are trademarks or registered trademarks of Motorola Trademark Holdings, LLC and are used under license.

RAM

®

 and RAM Mount™ are both trademarks of National Products Inc., 1205 S. Orr Street, Seattle, WA 98108.

Freefloat, Freefloat Link*One and Freefloat Access*One are trademarks of Freefloat, Mölndalsvägen 30B, SE-412 63Gothen-
burg, Sweden.

Qualcomm

®

 is a registered trademark of Qualcomm Incorporated. Gobi is a trademark of Qualcomm Incorporated.

OneClick Internet is WebToGo’s patented connection manager customized for Honeywell mobile devices. OneClick Internet 
documentation is copyright 2010 by WebToGo and modified by Honeywell with WebToGo’s express permission.

Verizon

®

 is a registered trademark of Verizon Trademark Services LLC.

T-MOBILE

®

 is a registered trademark of Deutsche Telekom AG.

AT&T

®

 is a registered trademark of AT&T Intellectual Property.

AuthenTec, TouchChip, Eikon and TrueSuite are registered trademarks and QuickSec, SafeXcel, DRM Fusion, SafeZone, Eikon, 
TrueNav, SteelCoat, TouchStone, DataDefender, MatrixSSL, MatrixDLS, TouchStone, SteelCoat, KeepVault, KeepSync and 
KeepSafe are trademarks of AuthenTec, Inc.

PenMount, and the Pen Mount logo are registered trademarks of Salt International Corporation, Taipei, Taiwan, R.O.C.

Wi-Fi

®

, WMM

®

, Wi-Fi Mutlimedia™, Wi-Fi Protected Access

®

, WPA™, WPA2™ and the Wi-Fi CERTIFIED™ logo are trade-

marks or registered trademarks of Wi-Fi Alliance.

Other product names or marks mentioned in this document may be trademarks or registered trademarks of other companies 
and are the property of their respective owners.

Patents

For patent information, please refer to

 www.hsmpats.com

.

Содержание Marathon































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды