Honeywell IH21, Руководство пользователя

Страница: 19 / 26

CHAPTER
2
IH21 Bluetooth UHF RFID Reader 13
CONNECTIONS
Connecting with USB
Overview
The IH21 UHF Reader has an ePop-Loq® mount which allows compatible devices
with custom applications to communicate with the reader via USB instead of
Blue-
tooth ®.
• USB connection will be passed through ePop-Loq to the attached device (via the
ePop-Loq case.)
• USB connection to the reader requires a custom application that supports the
ASCII protocol over USB.
• If the reader is placed into the charge cradle with an attached ePop-Loq mobility
device, the USB will be disconnected, and both the IH21 and the device will
charge.
USB Operating Modes
The ePop-Loq on the reader may operate in two modes. Charge-Only or Charge-
and-Data:
• Charge-Only: The mobility device mounted will charge when the reader is placed
in the charging cradle, but will never use the USB data connection
• Charge-and-Data: The mobility device will use the USB data connection when
not in the charging cradle.
Note: The USB connector on the charging cradle is always available when the reader is
docked.
Changing the USB Operating Mode
The factory default mode is Charge-Only.