- 6 -
Once the Febreze
®
Set&Refresh
®
scent cartridge is
properly installed, use the Febreze
®
Scent Control Dial
located on the top of the Fan control panel (Fig. 4), to
control the amount of scent released into the air.
Turn the Febreze
®
Scent Control Dial clockwise to release
increasing amounts of Febreze
®
scent into the air.
Keep the Scent Control Dial in the LOW position if you want
the minimum amount of Febreze
®
scent to be released into
the air and circulated by your fan.
Turning the Febreze
®
Scent Control Dial all the way to the
right (MAXIMUM) will release the maximum amount of Febreze
®
scent into your room.
PLEASE NOTE:
The speed at which you run your Honeywell with Febreze Freshness
™
Cool & Refresh Fan
does affect the length of time your Set&Refresh
®
scent cartridge will last.
An installed and activated Set&Refresh
®
scent cartridge will empty faster if you run your
fan at HIGH speed instead of LOW speed.
If you regularly run your fan at LOW speed while a Set&Refresh
®
scent cartridge is
installed and activated, the Set&Refresh
®
scent cartridge will last longer.
To operate the fan without any scent, simply remove the scent cartridge from the fan.
Febreze
®
Set&Refresh
®
scent cartridges are available in a variety of scents wherever
Set&Refresh
®
products are sold. Click on the ‘Buy Now’ link on www.Febreze.com to locate a
retailer near you.
CAUTION: EYE IRRITANT.
Avoid contact with eyes. Do not put fingers into product vent. Wash
hands after handling perfume cartridge.
KEEP OUT OF REACH OF CHILDREN AND PETS. FIRST AID TREATMENT:
Contains fragrance
oils. If eye contact occurs, rinse with plenty of water for 20 minutes. If eye irritation persists,
consult a physician.
IF SWALLOWED;
do not induce vomiting, call a physician or poison control center immediately.
CONTROLLING THE FEBREZE
®
SCENT
Scent Control
Fig. 4
