Honeywell hus-nvr-1032-e Скачать руководство пользователя страница 45

Страница: 45 / 85

Honeywell

Formatting Disk

To format a disk, right click the disk icon and select “Format” in the pop-up menu and then a

pop-up window is displayed:

Figure 5-21 Format

Click

and wait until the message pops up indicating it is successful.

Do not directly pull out the disk during the formatting process.

Viewing S.M.A.R.T. Information

S.M.A.R.T. information is used to detect the status of the disk. To view the S.M.A.R.T.

information of a disk, right click the disk icon and select “S.M.A.R.T.” in the pop-up menu.

The information will be displayed in a window as shown in the following figure (

Please

consult technicians)

Figure 5-22 S.M.A.R.T. Information

Click

to close the window.

Viewing Properties

To view the disk properties, right click the disk icon and select “Properties” in the pop-up

menu. The information will be displayed in a window as shown in the following figure:

Содержание hus-nvr-1032-e






















































































Результаты поиска

Содержание hus-nvr-1032-e

Отзывы:

Honeywell hus-nvr-1032-e, Руководство пользователя, Страница: 45 / 85

Результаты поиска

Содержание hus-nvr-1032-e

Отзывы: