Honeywell hus-nvr-1032-e Скачать руководство пользователя страница 10

Страница: 10 / 85

Introduction

Video Storage

•

8 SATA HDD slots supporting hot plug.

•

2 e-SATA ports to connect e-SATA disk or specified disk array (recomended).

•

Options on full HDD – Overwrite or Stop recording.

•

Video recordings are stored in specialized formats to prevent the data from being

altered and guarantee its integrity.

Video Backup

•

Use USB devices via the USB 2.0 interface.

•

Download history videos from NVR through the network interface.

Network Operations

•

Remote real-time surveillance.

•

PTZ control

•

Play back, search and download history videos.

•

Configure system settings and upgrade the firmware from the web client.

•

Handle alarms and view system log remotely.

•

User and password management can prevent unauthorized users from logging into

the system.

Communication Ports

•

RS485 port (Reserved)

•

RS232 port

•

Alarm input and Alarm output

•

RJ45 Ethernet port

User Interface Operations

•

With the mouse

•

With the keys on the front panel of NVR.

•

UI language supports English, simplified Chinese and traditional Chinese.

Specifications

Refer to the following table for the specifications:

Table 2-1 Specifications

Parameter

Value

Operating System

Embedded LINUX

User Interface

GUI (supports mouse operations)

Network Bandwidth

64Mbps

Содержание hus-nvr-1032-e






















































































Результаты поиска

Содержание hus-nvr-1032-e

Отзывы:

Honeywell hus-nvr-1032-e, Руководство пользователя, Страница: 10 / 85

Результаты поиска

Содержание hus-nvr-1032-e

Отзывы: