Honeywell
27
•
Show message: System can pop up a message to alarm you in the local host
screen if you enabled this function.
•
Send email: System can send out email to alert you when alarm occurs.
•
PTZ activation: Here you can set PTZ movement (of any video channels) such
as going to a preset when motion is detected in current video channel. Click
Select
, and you can see an interface is shown as in
Figure 4-15
.
•
Period:
Click
Set
to set the period for the channel to be armed for motion
detection, you can see an interface is shown as in
Figure 4-16
. Here you can
set for business day and non-business day. In
Figure 4-16
, click
Set
, and you
can see an interface is shown as in
Figure 4-17
. Here you can set your own
business day and non-business day.
•
Alarm output: When motion detection occurred, system enables peripheral
alarm devices.
•
Tour: Here you can enable tour function when alarm occurs. It is a one-
window tour. Please go to chapter 5.3.9 Display for tour interval setup.
Note
If there’re record channels selected, only the record channels
will be displayed in the tour.
Highlight icon
to select the corresponding function. After all the settings, click
Save
, and the system goes back to the previous menu.
Note
In
Figure 4-14
, you can left click mouse and then drag it to set a
region for motion detection. Click
Fn
to switch between
arm/withdraw motion detection. After setting, click enter button
to exit.
Figure 4-13 Motion Detection Menu
Содержание HSVR-16
Страница 2: ......
Страница 6: ...Honeywell iv 8 Appendix 111 HDD Capacity Calculation 111 Compatible USB Drive List 112 ...
