manualshive.com logo in svg

Honeywell HRG16, Руководство пользователя

Поделиться
Скачать
Honeywell HRG16 Скачать руководство пользователя страница 25

800-12005V1 - A - 08/2012

Introduction | 25

Alarm and Exception Features

•

Configurable arming time for alarm in/out. 

•

Support of various exception alarm types, including: alarms for video loss, motion 
detection, video tampering, unmatched video in/out format, illegal access, network 
disconnection, IP conflict, hard disk error, and hard disk full. 

•

Support of various exception alarm handling methods, including: pop-up alarm image on 
the monitor, audible warnings, surveillance center notifications, alarm output triggers, and 
send emails. 

•

Auto recovery from exceptions. 

Other Features

•

Use a mouse or the IR remote control to control the HRG DVR. 

•

Three-level user management. Each user has individual operating permission for the HRG 
DVR and cameras. 

•

Powerful recording and searching of operation, alarm, and exception logs. 

•

Import/export of device configuration files. 

Network Features

•

10M/100M adaptive network interface.

•

TCP/IP protocol suites, PPPoE, DHCP, DNS, DDNS, NTP, SADP protocols.

•

Unicast and multicast supported; TCP and UDP protocols applicable in unicast 
transmission.

•

Remote search, playback and download, lock/unlock of video files.

•

Breakpoint resume support.

•

Remote access and configuration of parameters; remote import/export of device 
configuration parameters.

•

Remote access of device running status, system log, and alarm status.

•

Remote formatting of hard disk, upgrade, reboot/shutdown, and other system 
maintenance operations.

•

Event alarm and exceptions upload to a remote management host.

•

Remote video image capture in JPEG format.

•

Remote PTZ control.

•

Voice talk and broadcast.

•

Built-in WEB Server. 

System Diagram

Connect your HRG DVR as shown in 

Figure 1-1

. 

Содержание HRG16









































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды