Honeywell HRG16 Скачать руководство пользователя страница 24

Страница: 24 / 136

24 | Performance Series DVR User Guide

www.honeywellvideo.com

Local Monitoring Features

•

Up to 1280 × 1024 resolution for VGA output display.

•

Simultaneous VGA and CVBS output.

•

Multi-camera video live view, with an adjustable camera order.

•

Group switch, manual switch, and automatic cycles modes that are selectable for video
live view, with a configurable auto-cycle period.

•

Digital zoom in live mode.

•

Shield of assigned channels for live view.

•

Privacy masking support.

•

Multiple PTZ protocols support, including the setting and call up of presets, patrols, and
patterns.

•

Video image zoom-in by clicking the mouse and tracing by dragging the mouse in PTZ
control mode.

Hard Disk Drive Management Features

•

S.M.A.R.T. technology.

•

HDD standby function.

Recording Features

•

Cycle and non-cycle recording mode.

•

Normal and event video encoding parameters.

•

Multiple recording types, including manual, normal, alarm, motion, motion/alarm, and
alarm recording.

•

Eight recording time periods, with separate recording types.

•

Pre-record and post-record time intervals for alarm and motion detection, and pre-record
time intervals for scheduled and manual recording.

•

Lock and unlock video files.

•

HDD can be set to read-only.

•

Video data search and playback by channel number, recording type, and time.

•

Digital zoom function in playback mode.

•

Pause, fast forward play, slow play, skip forward, and skip backward available during
playback.

•

Up to 4/8/16-channel synchronous playback.

Backup Features

•

Back up recorded files to a USB or SATA device.

•

Bunch backup by file or by time.

•

Recorded files edited for backup in playback.

•

Management and maintenance for backup devices.

Содержание HRG16









































































































































Результаты поиска

Содержание HRG16

Отзывы:

Бренды по названию

Популярные бренды

Honeywell HRG16, Руководство пользователя

Результаты поиска

Содержание HRG16

Отзывы:

Бренды по названию

Популярные бренды