IMPORTANT USER INFORMATION
1
The earmuffs should be fitted, adjusted and maintained in accordance with the
instructions.
2
The earmuffs should be worn at all times in noisy surroundings
3
The earmuffs should be regularly inspected for serviceability.
4
The earmuffs can be cleaned with soap and warm water. They should not be dipped
into water.
5
Earmuffs and, in particular, cushions may deteriorate with use and should be
examined at frequent intervals for cracking and leakage. To replace ear cushions,
pull off the old ones and snap the new ones into place. To order new ear cushions,
please see hygiene kit information.
6
The fitting of hygiene covers to the cushions may affect the acoustic performance
of the earmuffs.
7
Before and after use, store in a dry, cool place. The temperature should not exceed
+50
°
C.
8
T
his product may be adversely affected by certain chemical substances. Further
information should be sought from the manufacturer.
9
All Honeywell thermoplastic hearing protection products will remain in good
condition with regard to shelf life while the product is stored in a warehouse under
controlled conditions.
For Earmuffs: Humidity less than 80%, Temperature 0
°
C to 50
°
C.
(C) OPERATING THE HEADSET - GETTING STARTED
GETTING STARTED
Power On/Off
Hold
*C1
for 2s
Audio Tone
Adjust hear-through
volume
Rotate dial
**C5
Volume increase /decrease
DOSE MONITORING
Dose safe
(0-85%)
*C3
blinks green
Dose warning
(85%-100%)
*C3
blinks Warning tone
Dose Alarm
(Above 100%)
*C3
blinks red + Warning tone
Reset Dose
Hold
*C2
for 5s
On success,
*C3
double flashes green + audio
tone
Silence Dose Alarm
Press
*C2
*C3
flashes red and stops. Alarm stops
4
HEADSET CONTROLS
C1
Power Button
C5
Hear-Through Volume
C2
Dose Button
C6
Battery latch
C3
Dose Status Indicator
C7
Battery lid
C4
System Status Indicator
C8
Microphone Covers
