© 2017 Honeywell International Inc
Operation and maintenance manual HON HSV086
14
Press reset button A when valve shaft L is kept in its highest position. This makes
that switch rod M falls into balance jaw P;
Again slightly turn handle arm R back. Switch rod M is now locked by the balance
jaw. Let go of handle arm R. This can turn freely again;
The following steps for an HON HSVS
Handle arm H2 has now moved upwards. This moved support D3 against the force
of the two draw springs F2 into groove R4;
Push in hand wheel H3 and turn anti-clockwise;
When hand wheel H3 has been turned sufficiently a notch in valve rod S2
automatically snaps shut into support D3 (clearly audible);
Let go of hand wheel H3, so that it is disconnected from valve rod S2;
Check the open position of the valve (valve position indication K1), the closed
position of the bypass valve and the free turning of hand wheel H3, handle arm R
of the lifting component.
Figure 4: SVC 086 (HON HSV
)