28 | HD251(X)/HD262(X)/HB273(X) Camera Configuration Guide
www.honeywellvideo.com
Monitor
The Monitor setting is used to specify the type of monitor you are using, and adjust the
video signal so it can be optimally displayed on that monitor.
1.
Select
MONITOR
in the ADJUST menu by using the Up and Down OSD controls.
2.
Change the MONITOR selection by using the Left and Right OSD controls (see
Figure 31
). Monitor options are:
•
LCD: Select this option when you are using an LCD monitor with the camera.
•
CRT: Select this option when you are using an CRT monitor with the camera.
Gamma
Use the Gamma setting to adjust the gamma correction value. Gamma can be adjusted
from between 0.20 and 1.00.
LSC
The LSC function is used for compensating the brightness differences of the center of the
lens and its peripheries. When set to ON, LSC can be adjusted from 0 to 30.
1.
Select
LSC
in the ADJUST menu by using the Up and Down OSD controls.
2.
Change the LSC selection by using the Left and Right OSD controls.
3.
Set LSC to
ON
and press
SET
to open the LSC menu (see
Figure 32
).
4.
Change the LSC set level, as needed, from 0 to 30.
5.
Select
RETURN
and press
SET
.
Figure 32
ADJUST Menu - LSC Submenu Selection
ADJUST
SHARPNESS
15
MONITOR
LCD
GAMMA
0.55
LSC
ON
LANGUAGE
ENGLISH
COMMUNICATION OFF
DEFECT
AUTO
RETURN
LSC
SET LEVEL
10
RETURN
