Zone indicators
The zone indicators are not used on a BS Repeat panel. The
links that disable the zone indicators are located on the bottom
edge of the DKC and must be set to
'Without zone indicators'
position. The links are factory set for EN Repeat panel that is
'With zone indicator', see illustration on the right.
Display selection
"
The rotary switch SW3 is located on the Master
Repeat Card and must be set in the correct position for
the type of display used, factory set to position 4.
SW3
position Panel
0
A2/A3/A4 Mimic Panel only
1
3400 Repeat panel
(having a 4 line display)
2
32000 Repeat panel
(having a 16 line display)
3
Vigilon Repeat panel
(having a 16 line display)
4
Vigilon Repeat panel
(having an 8 line display)
5 to F
Not used
Write protect link
The
write protect link
P4 on the Master Repeat Card is factory
set to protected. Normally it is not necessary to change the link
from the factory set position, see the diagram above.
Contrast and Emergency controls
The
display contrast
is set using Pot RV1 on the DKC and is
factory set for optimum contrast.
The
emergency control
buttons must always be left in an
enabled state, with the control buttons link fitted.
At the end of their useful life, the packaging,
product and batteries should be disposed of
via a suitable recycling centre and in
accordance with national or local legislation.
Do not dispose of with your normal household waste.
Do not burn.
WEEE Directive:
At the end of their useful life, the packaging,
product and batteries should be
disposed of via a suitable recycling centre.
P9
L
N
N
P17
DANGER
BT+
BT
-
DANGER
NO NOT
REMOVE
3.15A(T)
mains fuse
L
N
P5
FS2
FS4
P2
P1
SW3
01 L1 02 L2
LC
P16
WRITE PROTECT
P8
P4
RESET
0C
+
RS485
0V 24V
-
BUZZER
DISABLE
PB2
WD1
P14
P7
USB
FS3
2A(QB)
SW3
Write Protected
(Factory setting)
P4
NOT Write Protected
P4
Buzzer
Disable
Buzzer Not
Disable
P14
P14
SW1
RV1
Sound Alarms
Silence Alarms
Reset
Verify
Control buttons
Inner door
1
2
3
4
17
18
19
20
Zones
With Zone
indicators
For keyswitch
application only.
Link is NOT USED
leave link fitted.
Display and
keyboard Card (DKC)
Without Zone
indicators
P6
P1
Buttons
enabled
Buttons
disabled
Factory setting
is with link fitted
8
7
6
5
4
3
2
1
ON
SW1
RV1
LCD Contrast adjust
OFF
Clockwise -
Darker
Anti-Clockwise -
Lighter
SW1
Leave all
switches
in the OFF
position
