Honeywell GENT Nano panel-based, Инструкции по вводу в эксплуатацию

Страница: 59 / 85

How to change the 'Signal' Settings
The tone style and Interface output pulse settings of Evacuate, Alert and Class Change signals can be changed from factory default settings. You will need to be at access level 3 or above to make
changes to signal settings.
How to set up weekly 'Fire test reminder'
A fire test reminder message can be configured to appear on the display on a specified day of the week to remind 'responsible person' to conduct a weekly fire test on the system. The message is
displayed at the beginning of the reminder day and is automatically removed the next day. You will need to be at access level 3 or above to set up a weekly fire test reminder.
4188-949 issue 3_05/10_Nano Comms inst. 59
Nano panel based system
How
to
c
hange
the
'Signal'
Settings
10:15 Tue 16/02/10
Weekly Fire Test Settings
Reminder is :
[OFF]
Test Day is : [MONDAY ]
Prompt: WEEKLY FIRE TEST DUE TODAY
Save Quit
Set Weekly fire test reminder to ‘ON’
or ‘OFF’ (factory default setting)
Select a test day from ‘MONDAY’ to ‘SUNDAY’
Save
Menu
Select
Settings
Select
System >
Select
User Weekly Test >
Select
To scroll the
range
To move to
the next setting
CONTINUOUS (Factory default setting),
1/2 SECOND PULSE, 1 SECOND PULSE
1/4 SECOND PULSE or NEE-NAW
Menu
Select
Alarms >
Select
Settings
Signals
To scroll the
range
To move to
next setting
After making changes to this form you will need to back-up the data to
memory. Ensure the write protect link P9 on the MCB is configured in
the ENABLED position to allow back-up of data.
1/4 SECOND PULSE (Factory default
setting), NEE-NAW, CONTINUOUS,
1/2 SECOND PULSE or 1 SECOND PULSE
(Factory default setting)
CONTINUOUS, 1/2 SECOND PULSE,
1 SECOND PULSE OR 1/4 SECOND PULSE
NEE-NAW
Save
10:15 Mon 16/02/09
Signal Settings
Tone Style I/O Pulse
Test : [½ SECOND PULSE ] [ 10]
C.Change : [CONTINUOUS ] [ 15]
Alert : [1/4 SECOND PULSE] [ 10]
Evacuate : [NEE/NAW ] [ 15]
Save Quit
8 - 630ms
9 - 800ms
10- 980ms
11- 1.2s 4 - 160ms
5 - 250ms
6 - 350ms
7 - 480ms 12- 1.4s
13- 1.6s
14- 1.9s
15- ON
Select
0 - OFF
1 - 10ms
2 - 40ms
3 - 90ms
The factory default settings for interface outputs are shown
here. To change the settings select from a range 0 to 15.
The ‘1/4 SECOND PULSE’ tone style is referred to as ‘Intermittent’
in the Nano Commissioning tool, they mean the same.
1/2 SECOND PULSE (Factory default
setting), 1 SECOND PULSE 1/4 SECOND
PULSE, NEE-NAW or CONTINUOUS.