GENESIS DM CLINICIAN GUIDE
Programming the Genesis DM Monitor
P.4510EN.01
12/5/2007
24
System Settings
After entering Setup Mode, press
YES
to scroll to
System Settings
, and then press
RETEST
to enter
the
System Settings
menu.
Volume
Options:
Lowest, Low, Med, High, And Highest
Default:
Med
Access Level: General
The volume setting controls both the key beep and the voice prompt volumes. To change the volume,
follow the steps below.
1.
Press
RETEST
to enter the
Volume
option. The current setting blinks.
2.
Press either
YES
or
NO
to scroll to a new setting, and press
RETEST
to accept the setting. A
sample sound clip plays. If the volume level is not satisfactory, press
RETEST
to reenter Volume
and change the setting.
You can scroll to the next
System Settings
option -or- press
MANUAL
to return to the
Main
menu, or press
START + YES
to exit Setup Mode.
Scale Prompt
Options:
OFF, every time for or any combination of days ( _ _ Mo _ _ We _ _ Fr _ _), or only one
time each day ( _ _ Mo* _ _ We* _ _ Fr* _ _ )
Default:
Every day ( Su Mo Tu We Th Fr Sa)
Access Level: General
Scale Prompt
allows you to turn the audio and text scale prompts off or turn the prompts on for all
or any combination of days. The factory default is on for every day. If the prompt is turned on, the
monitor prompts for (and collects) the patient’s weight at the beginning of each monitoring session.
In the
System Settings
menu, scroll to
Scale Prompt
, and press
RETEST
to enter. The first
selection blinks. If the prompt is off, only underscores display.
1.
Press either
YES
or
NO
to change the setting, and press
RETEST
to accept the new setting.
2.
Continue through the seven settings until all are set correctly.
Содержание GENESIS DM
Страница 2: ......