Honeywell G0062610, Руководство по установке

Страница: 33 / 40

31
Section 9
Quick Reference Guide
Problem LED Things to Check Active Alarm Solution
Unit running in AUTO but no
power in house. GREEN Check MLCB. NONE Check MLCB if the MLCB is in the ON position. If it is in
the ON position contact the servicing dealer.
Unit shuts down during
operation. RED Check the LED’s / Screen for
alarms. HIGH TEMPERATURE Check ventilation around the generator, intake, exhaust
and rear of generator. If no obstruction contact serving
dealer.
Unit shuts down during
operation. RED Check the LED’s / Screen for
alarms. OVERLOAD REMOVE
LOAD Clear alarm and remove household loads from the
generator. Put back in AUTO and restart.
Unit was running and shuts
down, attempts to restart. RED check the LED’s / Screen for
alarms. RPM SENSE LOSS Clear alarm and remove household loads from the
generator. Put back in AUTO and restart. It may be a fuel
issue so contact the servicing dealer.
Unit will not start in AUTO with
utility loss. NONE See if screen says unit not
activated. NOT ACTIVATED Refer to activation section in owners manual.
Unit will not start in AUTO with
utility loss. GREEN Check screen for start delay
countdown. None If the start up delay is greater than expected, contact
servicing dealer to adjust from 2 to 1500 seconds.
Unit will not start in AUTO with
utility loss. RED Check the LED’s / Screen for
alarms. LOW OIL PRESSURE Check Oil Level / Add Oil Per Owners Manual. If oil level
is correct contact servicing dealer.
Unit will not start in AUTO with
utility loss. RED Check the LED’s / Screen for
alarms. RPM SENSE LOSS Clear alarm. Check the battery using the control panel
under the MAIN menu using the BATTERY MENU
option. If it states battery is GOOD contact servicing
dealer. If it states CHECK BATTERY replace the battery.
Unit will not start in AUTO with
utility loss. RED Check the LED’s / Screen for
alarms. OVERCRANK Check fuel line shutoff valve is in the ON position. Clear
alarm. Attempt to start the unit in MANUAL. If it does not
start or starts and runs rough, contact servicing dealer.
Unit will not start in AUTO with
utility loss. RED Check the LED’s / Screen for
alarms. LOW VOLTS REMOVE
LOAD Clear alarm and remove household loads from the
generator. Put back in AUTO and restart.
Unit will not start in AUTO with
utility loss. RED Check the LED’s / Screen for
alarms. FUSE PROBLEM Check the 7.5 Amp fuse. If it is bad replace it with an
ATO 7.5 Amp fuse, if not contact servicing dealer.
Unit will not start in AUTO with
utility loss. RED Check the LED’s / Screen for
alarms. OVERSPEED Contact servicing dealer.
Unit will not start in AUTO with
utility loss. RED Check the LED’s / Screen for
alarms. UNDERVOLTAGE Contact servicing dealer.
Unit will not start in AUTO with
utility loss. RED Check the LED’s / Screen for
alarms. UNDERSPEED Contact servicing dealer.
Unit will not start in AUTO with
utility loss. RED Check the LED’s / Screen for
alarms. STEPPER
OVERCURRENT Contact servicing dealer.
Unit will not start in AUTO with
utility loss. RED Check the LED’s / Screen for
alarms. MISWIRE Contact servicing dealer.
Unit will not start in AUTO with
utility loss. RED Check the LED’s / Screen for
alarms. OVERVOLTAGE Contact servicing dealer.
Yellow LED illuminated in any
state. YELLOW Check the screen for
additional information. LOW BATTERY Clear alarm. Check the battery using the control panel
under the MAIN menu using the BATTERY MENU
option. If it states battery is GOOD contact servicing
dealer. If it states CHECK BATTERY replace the battery.
Yellow LED illuminated in any
state. YELLOW Check the screen for
additional information. BATTERY PROBLEM Contact servicing dealer.
Yellow LED illuminated in any
state. YELLOW Check the screen for
additional information. CHARGER WARNING Contact servicing dealer
Yellow LED illuminated in any
state. YELLOW Check the screen for
additional information. SERVICE A Perform SERVICE A maintenance, hit ENTER to clear.
Yellow LED illuminated in any
state. YELLOW Check the screen for
additional information. SERVICE B Perform SERVICE B maintenance, hit ENTER to clear.
Yellow LED illuminated in any
state. YELLOW Check the screen for
additional information. Inspect Battery Inspect Battery, hit ENTER to clear.