background image

 

OPERATOR MANUAL // LIMITED WARRANTY 

 

HONEYWELL  

26 

Limited Warranty 

Honeywell Analytics warrants its Products against defects in material and workmanship under normal 
use and service for a period of two (2) years from the date of shipment as described herein. Honeywell 
Analytics, at its option, will repair or replace, at no charge, such products found to be defective during 
the warranty period provided that they are returned in accordance with the terms of this warranty. 
Replaced parts or boards are warranted for the balance of the original applicable warranty period. All 
Replaced parts of Products shall become the property of Honeywell Analytics. This express limited 
warranty is extended by Honeywell Analytics to the original purchaser only and is not assignable or 
transferable to any other party. This is the complete warranty for the Products manufactured by 
Honeywell Analytics. Honeywell Analytics assumes no obligations or liability for additions or 
modifications to this warranty unless made in writing and signed by an officer of Honeywell Analytics. 
Honeywell Analytics does not warrant the installation, maintenance or service of its Products. Honeywell 
Analytics is not responsible in any way for ancillary equipment not furnished by Honeywell Analytics, 
which is attached to or used in connection with its Product(s), or for operation of the Product(s) with 
ancillary equipment and all such equipment if expressly excluded from this warranty. This warranty sets 
forth the full extent of Honeywell Analytics’ responsibility regarding the Products’ repair or replacement 
at Honeywell Analytics’ options, is the exclusive remedy.  
 
This Warranty is given in lieu of all other Express Warranties, Implied Warranties, including without 
limitation, Implied Warranties of Merchantability and fitness for a particular purpose, are limited to the 
duration of this Limited Warranty. In no other event shall Honeywell Analytics be liable for damages in 
excess of the purchased price of the product(s), for any loss of use, loss of time, inconvenience, 
commercial loss, lost profits or savings or other incidental, special or consequential damages arising out 
of or in connection with the use or inability to use such product, to the full extent such may be 
disclaimed by law.  
 
THIS WARRANTY DOES NOT COVER:  
1. Defects or damage resulting from use of the Product(s) in other than its normal and customary 

manner.  

2. Defects or damage from misuse, accident, or neglect.  
3. Defects or damage from improper testing, operation, maintenance, installation, alteration, 

modification or adjustment.  

4. Product(s) subject to unauthorized Product modifications, disassemblies or repairs (including, without 

limitation, the audition of the product of non-Honeywell Analytics supplied equipment) which 
adversely affect performance of the Product(s) to interfere with Honeywell Analytics’ normal warranty 
inspection and testing of the Product(s) to verify any warranty claim.  

5. Product(s) that have had the serial number removed or made illegible.  
6. Freight cost to the repair facility.  
7. A Product which due to illegal or unauthorized alteration of the software/firmware in the Product, does 

not function in accordance with Honeywell Analytics’ specifications.  

8. Scratches or other cosmetic damage to Product surfaces that do not affect the operation of the 

Product.  

9. Normal and customary wear and tear.  
 
Laws in the United States and other countries preserve for Honeywell Analytics certain exclusive rights 
for copyrighted Honeywell Analytics software/firmware, such as the exclusive rights to reproduce in 
copies and distribute copies of such Honeywell Analytics software/firmware. Honeywell Analytics 
software/firmware may be used only in the Product(s) in which the software/firmware was originally 
embodied and such software/firmware in such Product(s) may not be replaced, copied, distributed, 
modified in any way, or used to produce any derivative thereof. No other use including, without 
limitation, alteration, modification, reproduction, distribution, or reverse engineering of such Honeywell 
Analytics software/firmware or exercise or rights in such Honeywell Analytics software/firmware is 
permitted. No license is granted by implication, estoppel or otherwise under Honeywell Analytics patent 
rights or copyrights. 

 
 

Содержание FS10-R





























Отзывы: