8
successful or not.
i.e.: Programme executed successfully
2-3. Sync
The PC setup software is intended as an assistive
program for the Control Panel setup. Setup is only
complete after all the settings made on your PC have
been applied to the Control Panel with the Sync
function. Therefore it is imperative that the user sync
the PC with the Control Panel after each modification of
settings. If you close the PC software during setup,
the Control Panel will not recognize any configuration
you have made, with exception of “Add
Device/Remove Device”. (These two actions take
effect immediately.)
To Sync,
1.
Select [Sync] in the Top Menu.
2.
Click the
button located
at the lower right hand corner of the
screen.
The system will send the updated settings to the
Control Panel. It is recommended that you perform this
operation immediately after each settings change to
ensure the data in the Control Panel is always
up-to-date.
The Sync window (see below) will appear whenever
the system is writing data back to the Control Panel,
indicating that the system is in the process of
synchronizing.
Important note during Syncing:
When data is being synced to the Control Panel,
any security functions and home automation
Programmes, Schedules, and Events will not
operate during this period.
2-4. Event Log
The event log is a record of all activities executed by
the Control Panel. This is primarily captured and stored
in the Control Panel itself.
The Event Log function is used to retrieve the latest
event log from the Control Panel in the current window
on your PC.
Click the above button to load the latest event log from
the Control Panel and display it on screen.
The window (see below) will appear when the system
is loading event log from the Control Panel, indicating
that the system is in the process of synchronizing.
