Install batteries
1
Press
CONNECT
button at EIM or wireless adapter and wait for green flashing
light, then follow steps below.
Install quick reference card
Install 2 fresh AA batteries
2
FocusPRO
®
Thermostat Installation Guide
Programmable models only
Link thermostat(s) to wireless network
2
Wireless Setup
0
1
Next
Back
Wireless Setup
36
52
Back
Next
Wireless Setup
Wireless Setup
Back
Installation with EIM: Press
NEXT
(leave
zone number set to zero).
Installation with TrueZONE panel: Press
▲
or
▼
to set a zone number for this
thermostat (1 to 4), then press
NEXT
.
Installation with EIM: Press
NEXT
.
Installation with TrueZONE panel: Press
▲
or
▼
to select a name for this zone, then
press
NEXT
(see list of names on page 6).
Press
CONNECT
to establish a link to the
wireless network.
After a brief pause, the confirmation
screen at left should be displayed, to
verify that the wireless connection has
been established.
Press
DONE
to display the home screen.
Wireless Setup
Wireless Setup
Connected
Done
Zone name
Zone number
Connect
If E1 appears, see error codes on page 3.