GB
ExiLED
CBS Emergency Light
Installation:
266mm
132mm
223mm
53mm
ExiLED 25m
366mm
199mm
289mm
53mm
ExiLED 40m
Dimensional Drawings:
Step 2:
Install the retaining clip to hold the pictograms.
Step 1:
For double sided pictogram, install the appropriate pictograms to both sides, push up
until you hear click sound. For single sided pictogram, there is one blind pictogram in
the package.
Step 3:
Dismantle the luminaire by sliding the mounting part as shown in picture. Fasten the
mounting part (with screws from within) to either wall bracket(supplied), ceiling (with
or without supplied spacers), pendulum, wire or flag bracket.
The product contains bracket for wall mounting and spacers for ceiling mounting.
Step 4:
Make a hole on a black grommet and pass the mains cables through it. Connect the
mains cables to the terminal blocks: L for live wire, N for neutral and PE for ground.
2
Power supply cables cross section should be 0.8 - 3 mm . Tighten the cable tie around
the cables.
click
click
click
click
2
1
3
Honeywell Life Safety AS, Postboks 236, 1372 Asker
http://www.hls-nordic.com
4
