Honeywell Enraf 1010 CB, Руководство по программированию

Страница: 84 / 98

Recipes (7)
9 - 2 Model 1010 Application Pack CB Part No.: 4418024 - Rev. 1
Programming Manual
Constraints: Not available for straight loading arm.
Enter a value in the following range:

0.0 to 100.0% (0.0*)
NOTE: The Summary page will display percentage of base and blend product.
Clean Line Volume Use to enter clean line volume for the recipe.
Enter a value in the following range:

0 to 20
Adjust Additive
Quantity
Use to enter the additive amount to be injected per batch. Pressing the
corresponding key to select an injector.
Enter a value in the following range:

1 to number of assigned injectors (6 max)
Injector No n Quantity After pressing the corresponding key in the “Additive Setup” menu, to
select an injector, enter the total additive amount to be injected per
batch.
Enter a value in the following range:

0 to 9999 PPM/mls/cc (0*)
Additive Flush Volume When using additives, such as dyes, selecting an additive flush volume
makes sure that the final volume does not contain any additive. Select 0
to disable flush volume.
NOTE: For volumetric presets the unit will be ppm, but in mass loading units will be
ml or cc and the amount entered will be the amount per injection.
Enter a value in the following range:

0 to 999 (0*)
Summary page When recipe configuration is finished, the instrument displays the
Summary page. The Summary page displays the Slow Flow, High Flow,
Low Flow, and error status for both the base and the blend meters along
with the minimum preset and Recipe status.
RECIPES 8 7
ADDITIVE SETUP PPM
(1) - Additive Amount 1 0.0
(2) - Additive Amount 2 0.0
(3) - Additive Amount 3 0.0
(4) - Additive Amount 4 0.0
(5) - Additive Amount 5 0.0
(6) - Additive Amount 6 0.0
TO ADJUST QTY PRESS (1-6)
RECIPES 8 7
ADDITIVE SETUP PPM
(1) - Additive Amount 1 0.0
(2) - Additive Amount 2 0.0
(3) - Additive Amount 3 0.0
(4) - Additive Amount 4 0.0
(5) - Additive Amount 5 0.0
(6) - Additive Amount 6 0.0
TO ADJUST QTY PRESS (1-6)