Honeywell Enraf 1010 CB, Руководство по программированию

Страница: 30 / 98

System (2)
4 - 14 Model 1010 Application Pack CB Part No.: 4418024 - Rev. 1
Programming Manual
GP Input n Options and descriptions are common to GP Inputs 2 to 16.
Input Type The Input type sub-menu of the General Purpose Inputs menu allows
selection of type of input.
Select one of the following options:

None

Permissive

System Input

Arm Input

RIT Input (Available if RIT panel is enabled)
Input Function The Input function sub-menu of the General Purpose Inputs menu
allows selection of function for that input. Available input functions will
depend on the input type selected.
Select one of the following options for Input Type as Permissive:

Vapour Recovery
Input assigned to monitor the vapour recovery hose park switch.

Overfill/Ground
Input is assigned to monitor a vehicle grounding and overfill system
such as a Scully or Liquip system.

Programmable Permissive
Allows the selection of an additional permissive input and its asso-
ciated messages. The message is defined under the Configure
Messages menu item. See section 4.8.
The Permissive must be active to allow loading to take place.
GP Input Terminal
2 CA21/CA19
3 CA22/CA19
4 CA23/CA19
5 CA25/CA24
6 CA26/CA24
7 CA27/CA24
8 CA28/CA24
9 CB20/CB19
10 CB21/CB19
11 CB22/CB19
12 CB23/CB19
13 CB25/CB24
14 CB26/CB24
15 CB27/CB24
16 CB28/CB24