Honeywell EConnect TL9160AR, Руководство по установке, Страница: 20 / 80

System Installation Guide
69-2474EFS—01 20
Follow the guidelines below when mounting the thermostat:
• Do NOT install the thermostat in an area where it can be exposed to water or rain.
• Avoid locations where there are air drafts (top of staircase, air outlet), dead air spots
(behind a door), direct sunlight or concealed chimney or stove pipes.
• For a new installation, choose a location about 1.5 m (5 ft.) above the floor.
• Install the thermostat on an inside wall facing the heater.
• Keep the thermostat’s top and bottom air vents (openings) clean and unobstructed at
all times.
Two mounting plates are provided for mounting the thermostat on the wall or on a junction
box. Use
Method A
for a slimmer thermostat look. Choose
Method B
if you prefer not to
make an opening in the wall.
Method C
must be used for installation on a junction box.
Recessed mounting on a wall (Method A)
6 Mount thermostat and outdoor sensor
Mark the four corners and join
them to create a rectangular
outline. Cut along the outline to create
an opening in the wall. Secure the mounting plate to
the wall using provided wall
anchors and screws.
Mounting on a
wall (Method B) Mounting on a junction
box (Method C) Installing
faceplate
Use mounting plate with no opening.
Secure the mounting
plate to the wall using
provided wall anchors
and screws. Secure the mounting plate to a junction
box using provided mechanical screws. Complete the thermostat
installation by pressing
the faceplate against the
mounting plate.