Honeywell EConnect TL9160AR, Руководство по установке, Страница: 19 / 80

19 69-2474EFS—01
EConnect™ Wireless Thermostat Kit TL9160AR
Copy
Use this function to copy the configuration settings, the schedule settings or both to other
EConnect™ wireless thermostats in your house. This function is available only if the
thermostat is connected either to a remote control or outdoor sensor. The settings are
copied to other thermostats connected to the remote control or outdoor sensor.
# Display Button Step
1)
From the installer’s setup
menu, press as needed to
select
Copy and press OK .
2)
Press or to select
Schedule
,
Configuration
or
both. Press OK .
3) Wait may appear for several
minutes. When
DONE
appears, press Exit to return
to home menu.
System test
1 From the Home screen, press until the setpoint temperature is above the room
ambient temperature by at least 2°. Press Temporary .
2 Wait for Heat On to display on the thermostat.
3 Verify if the heater becomes hot.
4 Press
Cancel to return the thermostat to its previous mode.