Honeywell DCCC6500, Быстрый старт, Страница: 17 / 19

Quick Start: DC Charge Controller for Honeywell Wind Turbine WT6500 - Rev 2.0 - 29Nov11
Quick Start 17
BATTERY LED
1. GREEN
• Batteries are charged (when battery voltage stays at 55 V for a 48 V
battery system).
2. ONE RED BLINK
• Low battery fault – Batteries are lower than 45 V (for a 48 V battery
system).
3. TWO RED BLINKS
• High battery fault – Batteries are higher than 58 V (for a 48 V battery
system).
4. THREE RED BLINKS
• Charge over temp – Enclosure > 65°C or Heat Sink > 140°C
5. FOUR RED BLINKS
• Charge over current – Charge current > 24 Amps
GFI LED
1. RED
• Indicates GFI Fault
Status LED’s Operation Legend
TURBINE LED
1. NO LED
• Turbine is sleeping or DC Charge Controller is off
2. GREEN
• Turbine is running
3. RED
• Turbine is stopped
4. ONE RED BLINK
• No Wind Speed – Turbine Voltage > 40 VDC and Wind Speed = 0 MPH for
1 minute
5. TWO RED BLINKS
• Turbine over current – Turbine current > 9 Amps
6. THREE RED BLINKS
• No turbine fault – Turbine Voltage < 5 VDC and Wind Speed > 10
MPH for 1 minute
7. FOUR RED BLINKS
• Turbine over voltage – Turbine Voltage > 170 VDC