Honeywell D05FS, Руководство по установке, Страница: 7 / 22

MU1H-1034GE23 R0514 7 Honeywell GmbH
GB
10. Disposal
• Dezincification resistant brass housing
• High-quality synthetic material valve insert
• High-quality synthetic material spring bonnet with adjust-
ment knob and setting scale
• Spring steel adjustment spring
• Fibre-reinforced NBR diaphragm
• NBR and EPDM seals
Observe the local requirements regarding correct
waste recycling/disposal!
11. Troubleshooting
12. Spare Parts 13. Accessories
Problem Cause Remedy
Beating sounds Pressure reducing valve is too
large Call our Technical Customer Services
Water is escaping from the spring
bonnet Diaphragm in valve insert is faulty Replace valve insert
Too little or no water pressure Shutoff valves up- or downstream of the
pressure reducing valve are not fully open Open the shutoff valves fully
Pressure reducing valve is not set to the
desired outlet pressure Set outlet pressure
Filter in pressure reducing valve is conta-
minated Clean or replace filter
Pressure reducing valve is not fitted in flow
direction Fit pressure reducing valve in flow direction
(note direction of arrow on housing)
The outlet pressure set does not
remain constant Filter in pressure reducing valve is conta-
minated or worn Clean or replace filter
Valve insert, sealing ring or edge of nozzle
is contaminated or worn Replace valve insert
Rising pressure on outlet (e.g. in boiler) Check check valve, safety group etc.
No. Description Dimension Part No.
1 Spring bonnet
complete with setting
scale
1
/
2
" - 1" 0901515
1
1
/
4
" - 2" 0903890
2 Valve insert
complete (without
filter)
1
/
2
" - 1" D05FA-1/2B
1
1
/
4
" - 2" D05FA-11/4B
3 Replacement filter
insert 1/2" - 1" ES05F-1/2A
4 Blanking plug with O-
ring R
1
/
4
" (5 pcs.)
1
/
2
" - 2" S06K-1/4
M38K Pressure gauge
Housing diameter 50 mm, below connection thread
G1/4". Ranges: 0 - 4, 0 - 10, 0 - 16 or 0 - 25 bar.
Please indicate upper value of pressure range when
ordering
DS05 Insulation shells
Please indicate nominal size (1/2 to 2") when orde-
ring e.g. DS05-1/2
ZR06K Double ring wrench
For removal of spring bonnet
VST06-A Connection set
Threaded connections
VST06-B Connection set
Solder connections