S7999 CONTROLINKS™ DISPLAY MODULE
65-0262
8
Table 3. Selectable Messages.
Selectable Message/Display
Description
Possible States/Range
Comments
Total Cycles
Total number of equipment
operating cycles
0 to 999999
Cycle will be updated each time main
valve is energized.
Run Time
Total number of equipment
operating time (hours:minutes)
0:00 to 999999:00
Hours:minutes will be updated while
main valve input is energized.
Inputs/Outputs:
Top-level prompt for diagnostic
information.
Press the Change Level button to
enter the submenu.
CmA
Controller Input
4.0 to 20.0 mA
Firing Rate input.
ManPot
Manual Potentiometer
4.0 to 20.0 mA
Manual control potentiometer.
XmA
Auxiliary Input
4.0 to 20.0 mA
Temperature sensor input current.
XmA Temp
Auxiliary Input
-40°F to +1400°F
Temperature sensor input in degrees
Fahrenheit.
Current Fuel
Current fuel selected.
Fuel 1 or Fuel 2
The fuel selection as determined at
ControLinks™ System startup.
F2(1) Position
Fuel actuator position for
currently inactive fuel.
00% to 100%.
Either F2 or F1 will be shown,
whichever is the inactive fuel.
Manual T4
Manual/Auto Input
On/Off
ON indicates Manual is selected; OFF
indicates Auto is selected.
FSelect1 T5
Fuel 1 Input
On/Off
FSelect2 T6
Fuel 2 Input
On/Off
Alarm T7
Alarm Output
On/Off
HFP T8
High Fire Proven Output
On/Off
LFP T9
Low Fire Proven Output
On/Off
HF T10
High Fire Input
On/Off
MV T11
Main Valve Input
On/Off
LF T12
Low Fire Input
On/Off
LCI T13
Limit/Control Input
On/Off
LCO T14
Limit/Control Output
On/Off
Motor Settings
Top level prompt for motor
setting information.
Press the Change Level button to
enter the submenu.
Lightoff F1(2)
Indicates fuel actuator
programmed position during
Lightoff.
00% to 100%
Either F1 or F2 will be shown,
whichever is the active fuel.
Lightoff Air
Indicates air actuator
programmed position during
Lightoff.
00% to 100%
Lightoff FGR
Indicates FGR actuator
programmed position during
Lightoff.
00% to 100%
Purge F1(2)
Indicates fuel actuator
programmed position during
Purge.
00% to 100%
Either F1 or F2 will be shown,
whichever is the active fuel.
Purge Air
Indicates air actuator
programmed position during
Purge.
00% to 100%
Purge FGR
Indicates FGR actuator
programmed position during
Purge.
00% to 100%
Prog Stop F1(2)
Programmed stop of actuator.
00% to 100
Either F1 or F2 will be shown,
whichever is the active fuel.
Prog Stop Air
Programmed stop of actuator.
00% to 100