6
PROGRAMMING THE CM707
PROGRAMMING THE CM707
Modifying the Heating Program
To change the heating program:
a.
Press either of the
PROGRAM
or
buttons to enter the programming mode. The
time / temperature settings for period
1
on
Monday (Day 1) will be flashing as shown.
The active period is highlighted by a flashing
square around the numbers at the bottom of
the screen and the selected day is shown
with the day indicator.
b.
To adjust the period start time use the or
buttons, the ‘OK?’ indicator will
be displayed to confirm the change. Holding the button down will change the time
quickly.
Note:
If you are pressing the or buttons and the display flashes the next
period, it means the next period will be pushed forward.
1
2
3
4
5
6
7
4
3
2
1
The Built-in Heating Program
The built-in heating program has 4 temperature level changes per day that can be
set between 3.00am and 2.50am the following day - allowing you to maintain the
evening temperature after midnight. Each temperature level can be set between
5°C and 35°C, and adjusted in 0.5°C increments. The factory default program for
heating is as follows.
Reviewing the Heating Program
To review or edit the heating program use the
PROGRAM
or buttons to
navigate between the 4 individual programming periods for that day. Use the
DATE/
DAY
button to step through each day of the week, so the complete 7 day heating
program can be reviewed or edited.
Monday to Friday
(Day 1 to 5)
Period
1
2
3
4
Time
6:30
8:00
18:00
22:30
Temperature
20°C
16°C
20°C
14°C
Saturday & Sunday
(Day 6 & 7)
Period
1
2
3
4
Time
8:00
10:00
16:00
23:00
Temperature
20°C
18°C
20°C
14°C
