Honeywell Centra Line CLIF-CBUSLC, Инструкции по установке и пусконаладке, Страница: 2 / 24

CLIF-CBUSLC INTERFACE – INSTALLATION & COMMISSIONING INSTRUCTIONS
EN1Z-1026GE51 R0417 2
SAFETY INFORMATION
General Safety Information
►
When performing any work, all instructions given by the
manufacturer and in particular the safety instructions
provided in these Installation and Commissioning
Instructions are to be observed. Make sure that the local
standards and regulations are observed at all times.
►
The CLIF-CBUSLC Interface and C-Bus controllers may be
installed and mounted only by authorized and trained
personnel.
►
If the device housing is damaged or missing, immediately
disconnect it from any power.
►
If the device is broken or defective, do not attempt to repair
it yourself; rather, return it to the manufacturer.
►
It is recommended that devices be kept at room tem-
perature for at least 24 hours before applying power. This
is to allow any condensation resulting from low shipping /
storage temperatures to evaporate.
►
The CLIF-CBUSLC must be installed in such a manner
(e.g., in a lockable cabinet) as to ensure that uncertified
persons have no access to the terminals.
►
In the case of vertical mounting on DIN rails, the CLIF-
CBUSLC Interface should be secured in place using a
commercially-available stopper.
►
If the CLIF-CBUSLC is modified in any way, except by the
manufacturer, all warranties concerning operation and
safety are invalidated.
►
Rules regarding electrostatic discharge should be followed.
►
Use only accessory equipment which comes from or has
been approved by Honeywell.
Information as per EN 60730
Purpose
The purpose of the device is: OPERATING CONTROL. The
CLIF-CBUSLC is an interface device intended for HVAC in
home (residential, commercial, and light-industrial)
environments.
Construction
The CLIF-CBUSLC is an independently mounted electronic
control unit with fixed wiring.
Mounting Method
The CLIF-CBUSLC is suitable for mounting as follows:
►
in cabinets;
►
in fuse boxes conforming with standard DIN43880, and
having a slot height of max. 45 mm;
►
on walls (using accessory MVC-80-AC1).
Table 1. Information as per EN 60730
Shock protection
Class II
Pollution degree
2
Installation Class 3
Software class
Class A
Ball-pressure test
temperature
housing parts >75 °C
terminals >125 °C
WEEE Directive
WEEE: Waste Electrical and Electronic
Equipment Directive
 At the end of the product life, dispose of
the packaging and product in an
appropriate recycling center.
 Do not dispose of the device with the
usual domestic refuse.
 Do not burn the device.
Standards, Approvals, etc.
Degree of Protection: IP20 (mounted on walls, with two
accessory MVC-80-AC1 covers)
Refer to Code of Practice standards IEC 61000-5-1 and -2
for guidance.
The device complies with Ethernet Protocol versions IEEEC
802.3.
RELATED TECHNICAL LITERATURE
Table 2. Related Technical Literature
Title
Product
Literature no.
CLIF-CBUSLC – Product Data EN0Z-1026GE51
CLIF-CBUSLC – Mounting Instructions MU1Z-1026GE51
CentraLine NX C-Bus Driver – User Guide EN2Z-1021GE51
IF-LON2 – Product Data & Mounting Instr. MU1Z-0545GE51
General Security Best Practices EN0Z-1017GE51