GasAlertQuattro
User Manual
Sensors Due for Bump Test
,IDEXPSWHVWLVGXHWKHIROORZLQJVFUHHQGLVSOD\V
IODVKHV
IRUHDFKVHQVRUWKDWLVGXHIRUDEXPSWHVW
Note
N/A displays when the bump test interval has been defined as
0 days. Refer to
Bump Interval
.
a
&DXWLRQ
%:UHFRPPHQGVWREXPSWHVWWKHVHQVRUVEHIRUHHDFK
GD\¶VXVHWRFRQILUPWKHLUDELOLW\WRUHVSRQGWRJDVE\
H[SRVLQJWKHVHQVRUVWRDJDVFRQFHQWUDWLRQWKDW
H[FHHGVWKHDODUPVHWSRLQWV
3UHVV
C
WRDFNQRZOHGJHWKDWDEXPSWHVWLVGXH,I
)RUFH
%XPS
LVGLVDEOHGWKHGHWHFWRUHQWHUVQRUPDORSHUDWLRQ
)RUFH%XPS7HVW(QDEOHG
,IWKH
)RUFH%XPS
RSWLRQLV
HQDEOHGWKHIROORZLQJVFUHHQGLVSOD\V
7KHVHQVRUVPXVWSDVVWKHEXPSWHVWWRHQWHUQRUPDORSHUD
WLRQ
$SSO\JDVPDQXDOO\RUYLDWKH0LFUR'RFN,,VWDWLRQRUSUHVV
C
WRH[LWDQGGHDFWLYDWHWKHGHWHFWRU5HIHUWR
%XPS7HVW
Note
BW Technologies by Honeywell recommends to bump test the
sensors before each day’s use to confirm their ability to
respond to gas by exposing the sensors to a gas concentration
that exceeds the alarm setpoints. Manually verify that the audi-
ble and visual alarms activate. Calibrate if the readings are not
within the specified limits.
,IHUURUVFUHHQVGLVSOD\UHIHUWR
%XPS7HVW7URXEOHVKRRWLQJ
www.calcert.com
1.800.544.2843
0
5
10
15
20
25
30
