Honeywell BDR91T, Руководство пользователя

Страница: 12 / 34

12
OPERATING YOUR ST9420C
Choosing the Operating Mode
(for Heating and/or Hot Water)
The operating mode may only be changed when the slider is set to the RUN position.
The symbol is displayed during a programmed heating on period, and a
symbol is displayed during a programmed hot water on period. A green INDICATOR
LAMP shows when the heating or hot water is switched ON .
Two
MODE
buttons are provided to select the Operating Mode and therefore how the
heating and hot water are controlled.
Heating has four possible
Operating Modes ; these are OFF , AUTO , ONCE , CONT .
Pressing the heating
MODE
button scrolls round these modes in sequence, and the
display indicates which mode is currently active.
• OFF mode
The heating will remain OFF .
• AUTO (Automatic) mode
The heating will be switched ON and OFF according to the heating programme.
• ONCE mode
The heating will come ON at the first programmed ON time, and go OFF at the
last programmed
OFF
time.
• CONT (Continuous) mode
The heating will remain
ON
continuously.
The hot water MODE button operates in the same way as described above for the
heating
MODE
button.
Overriding the Operation Without Changing the Programmes
In
AUTO
and
ONCE
operating modes, the
OVERRIDE
buttons switch the heating or
hot water ON or OFF without altering the programme.
When the or symbol is displayed, pressing the OVERRIDE button switches
the heating or hot water
OFF
until the next programmed
ON
time.
If the or symbol is not displayed, pressing the OVERRIDE button switches
the heating or hot water ON until the next programmed OFF time.
The LoT™ Display will provide you with information about the override.
HOT WATER HEATING HOT WATER HEATING