Honeywell ADPRO iFT Series, Быстрая настройка

Страница: 7 / 20

ADPRO ADPRO iFT Series Quick Setup Guide
27929_07 7
5 Installing the XO Client Software on Your PC
5.1 System Requirements for the Client PC
5.1.1 Hardware
The following are the recommended hardware requirements to run the XO client on a PC:
l
Intel Core i5 processor with 8GB RAM
l
Graphics card with DirectX 12 support and the capability for using YUV surfaces and hardware stretching.
Intel® HD Graphics 630 is recommended.
The rendering switches to the GDI mode when the graphics card does not have this support. Rendering in GDI
mode is not recommended because of high CPU utilization.
The embedded client application is now by default a 64-bit application, and the customers who require a 32-bit
version can download it from the support site.
Caution!
HD cameras can be used more optimally in a PC with better system specifications. Please take into
account that double resolution, on average, results in 4 times more performance.
Honeywell advises to test the settings to make sure that your PC can handle your configuration.
5.1.2 Software
The following are the recommended software requirements to run the XO client on a PC:
l
Windows 10 (64-bit)
l
DirectX 12 drivers
l
Internet Explorer 11
Note
Firmware with hardware version 2.0.0.0 and software version 1.0.0.1 is needed to decode firmware in
the older devices still running the HIPI card hardware.
It is strongly recommended to download the latest drivers for your video card from the site of the
manufacturer of your card. Doing this will resolve a number of issues that you would probably
encounter.
l
NVIDIA: www.nvidia.com
l
ATI/AMD: http://ati.amd.com
The client can be forced to use GDI mode. Just put gdi=1 in the [General] section of the hydra.ini file
located in your data directory. The default location is:
c:\users\<username>\AppData\Roaming\Hydra\hydra.ini .
5.2 Installing the XO Client Software
This document describes how to install the XO client via the XO device's web page. For this, you need to add the
device's web page to the trusted sites in Internet Explorer. Furthermore, your PC must have an IP address in the
same network range as the XO device.
You can also install the XO client using the stand-alone client installer. This requires an internet connection for
downloading. For instructions, see the
XO Client Software User Manual (21796).