Honeywell ADPRO iFT Series, Быстрая настройка

Страница: 6 / 20

ADPRO iFT Series Quick Setup Guide ADPRO
6 27929_07
1 Packing List
After unpacking, check for any signs of damage. Report any damage to your supplier immediately. Also check
whether all items are present:
l
ADPRO
®
iFT Series device
l
Power cord
l
CD with client software and manuals
l
Quick Setup Guide
l
19" mounting brackets, black
l
Set of resistors (for built-in Main I/O card)
l
Set of 4 rubber feet to use the device as a desktop unit.
The products are provided with a plug according to the National Heavy Current Regulations of the country of
shipment. Installation shall be done according to National Regulations.
Note
Wherever iFT Series device or XO device is mentioned in this document, it refers to all models of
the iFT Series unless specifically mentioned otherwise.
2 Power Requirements
The XO device is designed for 100–240 V~, 50/60 Hz operation. XO devices comply with EMF emission and
immunity standards.
Caution!
Do not connect XO devices to electrical outlets or circuits shared with other devices that draw
significant startup currents, or cause significant electrical interference, such as air conditioners or
photocopiers.
3 Safety Instructions
The plug is used as power inlet for the XO device. The outlet socket must be installed near the XO device and
must be easily accessible. This equipment is not suitable for use in locations where children are likely to be
present.
4 Technical Documents
Download the iFT Series Hardware Installation Manual (27817) and XO Client Software User Manual (21796)
from our website www.xtralissecurity.com . You can also download technical data sheets on specific devices
that connect to the XO device.
You can find the latest versions of this document and any referenced document on the Security Solutions Support
site
www.xtralissecurity.com (logon may be required). If a document number is indicated (between parentheses),
you can enter it in the Keywords box on the site, and search for the document.