‡K4842-1V3Ê
K4842-1V3 6/06 Rev. B
SPECIFICATIONS
Dimensions:
5-3/8"H x 7-3/8"W x 1-1/4"D
(137mm x 187mm x 32mm)
Wiring Terminals:
▲
G
Data In to Control Panel
–
– Ground (12 VDC –)
+
+ 12 VDC Power Input
▼
Y
Data Out from Control Panel
Z4
+ Wired Zone 4
- Wired Zone 3 and Zone 4
Z3
+ Wired Zone 3
Z2
+ Wired Zone 2
- Wired Zone 1 and Zone 2
Z1
+ Wired Zone 1
NO
Relay N.O. contact
C
Relay Pole contact (common)
NC
Relay N.C. contact
-
LEGEND
= - (Ground/Common)
NOTE
: The keypad will display “OPEN CKT” and
beep periodically when there is a fault that prevents
data from reaching the keypad.
Display:
2 x 16 alphanumeric supertwist LCD, backlit.
Sounder:
Speaker (fire alarm sound is loud, temporal pattern
pulsed tone; burglary alarm sound is loud,
continuous, dual tone).
Voltage:
12 VDC
Current:
Alarm rating: 190mA (LCD backlight on, sounder
on, relay OFF)
Standby rating: 115mA (LCD backlight on, sounder
off, relay on); 55mA (LCD backlight off, sounder off,
relay off)
The control panel determines whether LCD backlighting
is on or off. When determining the capacity of the control
panel’s backup battery, use the following chart:
If Backlighting is . . .
Then . .
.
On steadily
Use the 115 mA
current
rating.
Off when keypad is inactive Use the 55mA current
rating.
REFER TO THE INSTALLATION INSTRUCTIONS FOR THE CONTROL PANEL WITH WHICH THIS DEVICE IS
USED FOR WARRANTY INFORMATION AND FOR LIMITATIONS OF THE ENTIRE ALARM SYSTEM.
165 Eileen Way, Syosset, New York 11791
Copyright © 2006 Honeywell International Inc.
www.honeywell.com/security
WWW.DIYALARMFORUM.COM
WWW.DIYALARMFORUM.COM
