background image

9

TO CLEAN THE INSIDE AND THE EXTERIOR OF THE WINE 

CHILLER

Always unplug the chiller before cleaning. Do not use a hard brush or sponge. Use 

appropriate stainless steel cleaner when cleaning the door frame of the chiller. When 

cleaning the body of the chiller, use light soapy water with a soft cloth. When cleaning the 

inside DO NOT use soap or any detergent products. Use only a dry, soft cloth or towel. 

DEFROSTING THE WINE CHILLER

If frost builds up in and around the chiller, that means there is too much humidity near the 

unit. Unplug the chiller and once the frost melts, carefully wipe down the outside or inside of 

the chiller.
NOTE: DO NOT USE A HEATER OR A SHARP UTENSIL TO REMOVE THE FROST.

IN THE EVENT OF A POWER FAILURE

In the event of a power failure, do not open the wine chiller door too frequently to 

ensure the internal temperature remains the same. A slight and gradual increase in 

temperature should have no effect on the wine.
If the ambient temperature is very hot, remove the wine from the chiller and place in a 

cooler environment. 

CLEANING THE DUST FILTER/SCREEN

It is recommended that the dust filter/screen be cleaned every 6 months. Build up of dirt, 

dust, and other debris can decrease the efficiency of the cooling system. To clean the 

filter/screen, use a vacuum cleaner or a compressed air container. When using a compressed 

air container, please follow the directions and safety regulations of that product. 

CARE AND CLEANING

PREPARING THE WINE CHILLER FOR VACATION

For long vacations or absences, remove all bottles from the wine chiller and unplug the power 

supply. Move the thermostat to the lowest temperature setting before cleaning the interior 

and leave the door open.

TRANSPORTING THE WINE CHILLER

For transporting the wine chiller, secure all loose items, such as shelves by taping them 

securely in place to prevent damage.
NOTE: BE SURE THE WINE CHILLER STAYS IN AN UPRIGHT POSITION DURING 

TRANSPORTING.

Содержание 88065













Отзывы: