Honeywell 8712009, Руководство по установке и эксплуатации

Страница: 7 / 20

Page 5
NOTE: Deadbolt Latch must be retracted when installing
NOTE: You are standing outside the door
PREPARING THE INTERIOR ASSEMBLY
6. SET THE ENTRY SWITCH FOR LEFT OR RIGHT HANDED DOOR
a. Gently move the switch to “L” for Left Handed Door (Figure 6a).
b. Gently move the Switch to “R” for Right Handed Door (Figure 6b).
7. SET THE INTERIOR KNOB POSITION FOR LEFT OR RIGHT HAND HINGED DOORS
a. The Interior Knob goes in the Horizontal position for Left Handed Doors (Figure 7a).
b. The Interior Knob goes in the Vertical position for Right Handed Doors (Figure 7b).
NOTE: Make sure deadbolt Latch is retracted
Right Handed Door
(Vertical)
Entry Switch
(Left or Right)
Left Handed Door
(Horizontal)
5. UNPACK THE INTERIOR ASSEMBLY
a. Remove the battery cover by sliding the cover upward.
b. Locate the screws holding the Mounting Plate to the Interior Assembly. Remove the
screws to release the Mounting Plate from the Interior Assembly.
Figure 6a-b
Figure 7a-b