Dolphin® 7600 Mobile Computer
User’s Guide
Rev A
5/23/2008
3 - 25
Resetting the Terminal
There are two ways to reset the Dolphin terminal: a soft reset and a hard reset.
Soft Reset (Warm Boot)
A soft reset re-boots the terminal without losing RAM data. You would perform a soft reset 1) after
installing software applications that require a reboot, 2) after making changes to certain system settings,
or 3) when the terminal fails to respond.
1.
Press and hold Red
+ ESC
for approximately 5 seconds. The screen turns white and the
decode and scan LEDs flash for approximately three seconds.
2.
When the reset is complete, the
Today Screen
(see page 2-2) appears.
Hard Reset (Cold Boot)
A hard reset erases all of the data and applications stored in RAM memory and launches AutoInstall, which
re-initializes the terminal.
Hard resets automatically launch a soft reset as part of the boot process.
1.
Press and hold Red
+ TAB
for approximately 5 seconds. The screen turns white and the
decode and scan LEDs light for approximately three seconds.
2.
The terminal re-initializes, which re-installs all programs stored in the \IPSM\Autoinstall folder.
Note:
Set the time and date after each hard reset to ensure that the system clock is accurate. Tap the date on the
Today Screen
(see page 2-2) to open the Clock setting and set the time and date.
!
Downloaded from
www.Manualslib.com
manuals search engine
Содержание 7600BG-122-B4EE - Hand Held Products Dolphin 7600
Страница 104: ...8 12 Rev A 5 23 2008 Dolphin 7600 Mobile Computer User s Guide Downloaded from www Manualslib com manuals search engine ...
Страница 120: ...10 8 Rev A 5 23 2008 Dolphin 7600 Mobile Computer User s Guide Downloaded from www Manualslib com manuals search engine ...
Страница 136: ...13 6 Rev A 5 23 2008 Dolphin 7600 Mobile Computer User s Guide Downloaded from www Manualslib com manuals search engine ...
Страница 141: ...Downloaded from www Manualslib com manuals search engine ...
