PLEASE READ ALL INSTRUCTIONS BEFORE USING THIS PRODUCT. Save these
instructions for easy reference.
When using electrical appliances, basic precautions should always be followed
to reduce breakage, risk of fire, electric shock and injury to persons including
the following:
1. Read all instructions before operating the air cleaner.
2. Place air cleaner where it is not easily knocked over by persons in
the household.
3. Always unplug when not in use.
4. Do not use any product with a damaged cord or plug or if product
malfunctions, is dropped or damaged in any manner. Keep the cord
away from heated surfaces.
5. Do not use air cleaner outdoors.
6. Never use air cleaner unless it is fully assembled.
7. Do not run power cord under carpets, and do not cover with throw rugs.
Arrange cord such that it will not be tripped over.
8. Do not use air cleaner where combustible gases or vapors are present.
9. Do not expose the air cleaner to rain, or use near water, in a bathroom,
laundry area or other damp location.
10. To disconnect the air cleaner, first turn speed control to OFF position and
remove plug from the outlet.
11. The air cleaner must be used in its upright position.
12. Do not allow foreign objects to enter ventilation or exhaust opening as
this may cause electric shock or damage to the air cleaner. Do not block air
outlets or intakes.
13. Locate air cleaner near power outlet and avoid using an extension cord.
14. The air cleaner has a polarized plug (one blade is wider than the other). To
reduce risk of shock, this plug is intended to fit in a polarized outlet only one
way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not
fit, contact a qualified electrician. DO NOT attempt to defeat this safety feature.
15. A loose fit between the plug and the AC outlet (receptacle) may cause
overheating and a distortion of the plug. Contact a qualified electrician to
replace loose or worn receptacles.
16. Do not sit, stand or place heavy objects on the air cleaner.
17. Disconnect power supply before servicing.
18.
WARNING:
To reduce risk of fire or electric shock, do not use this product
with any solid-state speed control device.
Important Safety Instructions
1
