Honeywell 2020, Руководство пользователя

Страница: 51 / 284

2 - 21
2020 Host Escape Commands
Wand Emulation
Wand Emulation Connection
The Wand Emulation Connection barcodes should be used if you want to
change the terminal ID
only, without changing any other image scanner set-
tings. We recommend using Wand Emulation Plug & Play barcodes to program
your image scanner to emulate a wand reader. The Wand Emulation Plug &
Play barcodes change other parameters, in addition to changing the terminal ID.
Please refer to
Wand Emulation Plug & Play on page 2-2 for further information.
In Wand Emulation mode, the image scanner decodes the barcode then sends
data in the same format as a wand scanner. The Code 39 Format converts all
symbologies to Code 39.
The Same Code Format transmits UPC, EAN, Code 128 and Interleaved 2 of 5
without any changes, but converts all other symbologies to Code 39. 2D sym-
bologies are converted to Code 128.
Command Action
<ESC> a Double beeps to indicate a successful menu change was
made.
<ESC> b Triple beeps to indicate a menu change was unsuccessful.
<ESC> 1 The green LED illuminates for 135 milliseconds followed by a
pause.
<ESC> 2 The green LED illuminates for 2 seconds followed by a
pause.
<ESC> 3 The green LED illuminates for 5 seconds followed by a
pause.
<ESC> 4 Emits a beep at a low pitch.
<ESC> 5 Emits a beep at a medium pitch.
<ESC> 6 Emits a beep at a high pitch.
<ESC> 7 Beeps to indicate a successful decode and communication to
host.
<ESC> 8 Triple beeps to indicate a decode/communication to host was
unsuccessful.