manualshive.com logo in svg

Honeywell 2020, Руководство пользователя

Поделиться
Скачать
Honeywell 2020 Скачать руководство пользователя страница 266

15 - 4

QUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY 
NOT APPLY TO YOU.

All provisions of this Limited Warranty are separate and severable, which 
means that if any provision is held invalid and unenforceable, such determina-
tion shall not affect the validity of enforceability of the other provisions hereof.  
Use of any peripherals not provided by the manufacturer may result in damage 
not covered by this warranty. This includes but is not limited to: cables, power 
supplies, cradles, and docking stations. HII extends these warranties only to the 
first end-users of the products.  These warranties are non-transferable.

The duration of the limited warranty for the 2020 and 4820i/4820i is three (3) 
year(s).  The duration of the limited warranty for the image scanner battery is 
one (1) year.

Содержание 2020





























































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды