manualshive.com logo in svg

Honeywell 2020, Руководство пользователя

Поделиться
Скачать
Honeywell 2020 Скачать руководство пользователя страница 156

7 - 38

UPC/EAN Version

Scan the

 UPC/EAN Version On

 barcode to decode GS1 Composite symbols 

that have a UPC or EAN linear component.  (This does not affect GS1 Compos-
ite symbols with a GS1-128 or GS1 linear component.)

GS1 Composite Code Message Length

Scan the barcodes below to change the message length.  Refer to 

Message 

Length Description

 (page 7-2) for additional information.  Minimum and 

Maximum lengths = 1-2435.   Minimum Default = 1, Maximum Default = 2435.

GS1 Emulation

The imager can automatically format the output from any GS1 data carrier to 
emulate what would be encoded in an equivalent GS1-128 or GS1 DataBar  
symbol.  GS1 data carriers include UPC-A and UPC-E, EAN-13 and EAN-8, 
ITF-14, GS1-128, and GS1-128 DataBar and GS1 Composites.  (Any applica-
tion that accepts GS1 data can be simplified since it only needs to recognize 
one data carrier type.)

If 

GS1-128 Emulation

 is scanned, all retail codes (UPC, UPC-E, EAN8, 

EAN13) are expanded out to 16 digits.  If the AIM ID is enabled, the value will 
be the GS1-128 AIM ID, ]C1 (see 

Symbology Chart

 on page A-1).

If 

GS1 DataBar Emulation

 is scanned, all retail codes (UPC, UPC-E, EAN8, 

EAN13) are expanded out to 16 digits.  If the AIM ID is enabled, the value will 
be the GS1-DataBar AIM ID, ]e

m (see 

Symbology Chart

 on page A-1).

If 

GS1 Code Expansion Off

 is scanned, retail code expansion is disabled, and 

UPC-E expansion is controlled by the 

UPC-E0 Expand

 (page 7-22) setting.  If 

the AIM ID is enabled, the value will be the GS1-128 AIM ID, ]C1 (see 

Symbology Chart

 on page A-1).

UPC/EAN Version On

*  UPC/EAN Version Off

Maximum  Message Length

Minimum Message Length

Содержание 2020





























































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды