INNCOM E7 THERMOSTAT USER GUIDE
36-00013—02
16
SETUP FAN SPEED
1.
Once FAN is displayed, press MODE. Then use the UP/DOWN arrow
buttons to choose the fan speed:
00
: Not Defined
Lo
: Low Speed (single speed)
LH
: Low / High
LMh
:Low / Medium* / High
*For heat pump models utilizing reversing valve, medium heat and
medium fan speed will not be available.
2.
Press FAN to execute the setting, the unit
beeps
to confirm it is set.
Exit Initialization Mode
When setup is complete, exit INITIALIZATION MODE by pressing the
o
F|
o
C
key.
Str
is displayed, indicating the setup values are stored in memory, the unit
reboots and begins operating the HVAC equipment as configured.
Resetting Initialization Mode
If the user needs to return to the settings made in INITIALIZATION MODE, do
the following:
1.
Enter SERVICE MODE:
(1) Press and hold
o
F|
o
C.
(2) Press and hold MODE.
(3) Press and hold FAN.
(4) Release
o
F|
o
C.
2.
Use the UP/DOWN arrow buttons to display
rst,
then press MODE.
3.
Use the DOWN button to select
255
.
4.
Press FAN.
5.
The unit will reset, clear all previous values, and enter INITIALIZATION MODE again.
