25
6.2.5
Automatic address allocation with transponder
The address allocation mode must be activated.
Hold a transponder e.g. chipcard or key fob) in the reading range The
now transmits the
unique number (serial number) to the
. The
allocates a free address to this number
and transmits the unique number plus the address back to the
. After a brief interval, the
stores the address
.
(
.
reader
ACS-8
ACS-8
reader
reader
permanently
Address acknowledgement: After approx. 1 sec. the LEDs indicate the allocated address (see
6.2.3).
or other
transponder
Unique number
Unique number
address
+
ACS-8
allocates a free
address to the
unique number
F
i
2
3
6
5
4
7
8
9
3
0
r
1
2
3
6
5
4
7
8
9
3
0
r
1
Delete
Reject
Confirmation
OK
For further operating
sequences, see "NetEdit"
6.2.6
Manual address allocation via reader keypad
The address allocation mode must be activated.
When using this allocation mode, a specific address can be allocated to a
reader on site. The
plausibility check in the AC system prevents an
address from being allocated more than once.
- Every activated key is acknowledged by a click.
- An address entry can be rejected by an .
Enter the new address with 1 or 2 digits and acknowledge with OK (key
).
The address is transmitted to the ACS-8 and checked.
After remaining blank for approx. 1 sec. the LEDs indicate the newly
allocated address (see 6.2.3).
If the address is already occupied, it is not allocated to the reader and there is no address displayed.
Enter new address with 1 or 2 digits and acknowledge with OK. (Acknowledgement and display as
described above). All allocated parameters are transmitted from the old address to the new one so
that the old address can be re-allocated.
Note:
X
Positive acknowledgement
Negative acknowledgement
Change address
3
Mounting and Operating Instructions - proX2-reader "Accentic" with keypad
