background image

GET

TING 

ST

ARTED

Congratulations for selecting the Media Air Cleaner for your home comfort system! The Media Air Cleaner 

captures and removes a significant amount of the air-borne particles from the air circulated through the 
high-efficiency pleated media filter. The Media Air Cleaner easily mounts in any position within the return 
air duct of any gas, oil, and electric forced warm air furnaces and to compressor cooling up to 5 tons. 
Additionally, it requires no electrical connections or maintainence beyond periodic media filter replacement.

When Installing this Product...

1. 

Read these instructions carefully. Failure to follow them could damage the product or cause a hazardous condition.

2. 

Check the rating given in the instructions and on the product to make sure the product is suitable for your 
application.

3. 

Installer must be a trained, experienced service technician.

4. 

After installation is complete, check out product operation as provided in these instructions.

How it Works

The filter in your Media Air Cleaner is made up of a web of fibers.  As air passes through the Media Air Cleaner, 
particulates such as dust, pollen, dander, mold, and bacteria collide with the fibers in the filter and become 
trapped. Meanwhile, the clean air is allowed to continue through your heating and cooling system and into 
your home.  The particle removal efficiency of the Media Air Cleaner can be found in the Specification section 
of this manual.

What to Expect From Your Media Air Cleaner

Application Considerations

The Media Air Cleaner is designed to work with gas, oil, and electric forced warm air furnaces and with 

compressor cooling. It can also be used with heat pumps if the filter is changed regularly to prevent excessive 
pressure drop. The Media Air Cleaner is not recommended for applications where pressure drop may be 
critical.

Models

F100F Media Air Cleaner includes cabinet, access door and MERV 11 pleated media filter.
F200F Media Air Cleaner includes cabinet, access door and MERV 13 pleated media filter.

Air Conditioning

Mount the media air cleaner upstream of the evaporator coil in a cooling system. The filter will help to keep 
the coil clean and reduce maintenance.

Humidifiers

The media air cleaner is compatible with humidifiers. Avoid applications where water mist will reach the 
media. If an atomizing humidifier is used, the media filter will require replacement more often because of 
minerals in the water.

UV Lights

Germicidal UV lights can cause degradation of the media filter.  The UV light should be located out of line of 
sight or a minimum of 3 feet from the filter.  Otherwise the filter may need to be replaced more frequently.

Media Air Cleaner   68-0239EF—13

2

Содержание F100F





















Отзывы: