Honda X-ADV 750, Руководство пользователя, Страница: 97 / 167

7.
Remove the oil filter with a filter wrench
and let the remaining oil drain out. Make
sure the prior seal is not stuck to the
engine.
u
Discard the oil and oil filter at an
approved recycling centre.
8.
Apply a thin coat of engine oil to the
rubber seal of a new oil filter.
9.
Install the new oil filter and tighten.
Torque: 26 N·m (2.7 kgf·m, 19 lbf·ft)
10.
Install a new sealing washer onto the
drain bolt. Tighten the drain bolt.
Torque: 30 N·m (3.1 kgf·m, 22 lbf·ft)
11. Fill the crankcase with the recommended
oil (
2
P. 76,
2
P. 159) and install the oil fill
cap/dipstick.
Required oil
When changing oil & engine oil
filter:
3.4 L (3.6 US qt, 3.0 Imp qt)
When changing oil only:
3.2 L (3.4 US qt, 2.8 Imp qt)
12.
Check the oil level.
2
P. 91
13.
Check that there are no oil leaks.
14. Install the parts in the reverse order of
removal.
Engine Oil
u
Changing Engine Oil & Filter
Maintenance
94
Rubber seal
Oil filter