manualshive.com logo in svg

Honda X-ADV 750, Руководство пользователя, Страница: 142 / 167

Поделиться
Скачать
Honda X-ADV 750 Скачать руководство пользователя страница 142

3.

Adjust the drive chain. 

2

P. 104

4.

Install and tighten the rear axle nut.

Torque: 

98 N·m (10.0 kgf·m, 72 lbf·ft).

5.

After installing the wheel, apply the brake

lever several times, then check if the

wheel rotates freely. Recheck the wheel if

the brake drags or if the wheel does not

rotate freely.

6.

Install the parking brake caliper and

tighten the mounting bolts.

Torque:

 31 N·m (3.2 kgf·m, 23 lbf·ft).

u

Take care to prevent the brake caliper

from scratching the wheel during

installation.

u

Use new mounting bolts when

installing the parking brake caliper.

NOTICE

When installing a caliper into original position,

carefully fit the brake disc between the pads to

avoid scratching them.

If a torque wrench was not used for

installation, see your dealer as soon as

possible to verify proper assembly.

Improper assembly may lead to loss of

braking capacity.

Tyre Puncture 

u

 

Removing Wheels

Troubleshooting

139

Содержание X-ADV 750








































































































































































Отзывы:

Нет отзывов