manualshive.com logo in svg

Honda X-ADV 750, Руководство пользователя, Страница: 140 / 167

Поделиться
Скачать
Honda X-ADV 750 Скачать руководство пользователя страница 140

5.

Loosen the rear axle nut, lock nuts and

turn the adjusting bolts so the rear wheel

can be moved all the way forward for

maximum drive chain slack.

6.

Remove the rear axle nut/washer.

7.

Remove the drive chain from the driven

sprocket by pushing the rear wheel

forward.

8.

Remove the rear axle shaft and adjusting

plates.

9.

Remove the brake caliper bracket, rear

wheel and side collars.

u

Support the brake caliper assembly so

that it doesn’t hang from the brake

hose. Do not twist the brake hose.

u

Avoid getting grease, oil, or dirt on the

disc to pad surfaces.

u

Do not pull the rear brake lever while

the wheel is removed.

u

Do not pull the parking brake lever

while the wheel is removed.

Tyre Puncture 

u

 

Removing Wheels

Troubleshooting

137

Continued

Lock nut

Adjusting

plate

Adjusting bolt

Pulser ring

Wheel speed sensor

Rear axle nut/

washer

Lock nut

Adjusting bolt

Rear axle shaft

Drive chain

Adjusting plate

Содержание X-ADV 750








































































































































































Отзывы:

Нет отзывов